How To Remove Red And Orange State Warning In Mediatek Devices

Yellow states that you have used an alternate Keystore to verify the boot image. On the other hand, the Orange state signifies that the device’s bootloader has been unlocked and hence the OS wasn’t able to verify the boot image. Finally, the Red state is mostly visible in the case of bricked devices and the only way out is to flash the stock firmware. As far as the warning message goes, here’s what Orange and Red states have to say: It goes without saying that getting this warning message every time your device boots up isn’t something that you would want. So in this guide, we will make you aware of the steps to remove the Red and Orange state warning from your MediaTek device. Follow along. Red State: Your device has failed verification and may not…..work properly…Please download %s image with correct signature…..or disable verified boot…Your device will reboot in 5 seconds.

How to Remove Red and Orange State Warning in MediaTek Devices

That’s it. These were the steps to remove the Red and Orange state warning in MediaTek devices. However, our job is only half done. Let’s now flash this lk.img file to your device for the changes to be implemented successfully.

How to Flash LK.img

The below instructions are listed under separate sections for ease of understanding. Make sure to follow in the same sequence as mentioned. Droidwin and its members wouldn’t be held responsible in case of a thermonuclear war, your alarm doesn’t wake you up, or if anything happens to your device and data by performing the below steps.

STEP 1: Install Android SDK

First and foremost, you will have to install the Android SDK Platform Tools on your PC. This is the official ADB and Fastboot binary provided by Google and is the only recommended one. So download it and then extract it to any convenient location on your PC. Doing so will give you the platform-tools folder, which will be used throughout this guide.

STEP 2: Enable USB Debugging and OEM Unlocking

Next up, you will have to enable USB Debugging and OEM Unlocking on your device. The former will make your device recognizable by the PC in ADB mode. This will then allow you to boot your device to Fastboot Mode. On the other hand, OEM Unlocking is required to carry out the bootloader unlocking process.

So head over to Settings > About Phone > Tap on Build Number 7 times > Go back to Settings > System > Advanced > Developer Options > Enable USB Debugging and OEM Unlocking.

STEP 3: Unlock Bootloader

Next up, you will also have to unlock the device’s bootloader. Do keep in mind that doing so will wipe off all the data from your device and could nullify its warranty as well. So if that’s all well and good, then please refer to our detailed guide on How to Unlock the Bootloader of any Android Device.

STEP 4: Boot to Fastboot Mode

STEP 5: Flash LK.img file

So with this, we round off the guide on how you could remove the Red and Orange state warning in MediaTek devices. If you have any queries concerning the aforementioned steps, do let us know in the comments. We will get back to you with a solution at the earliest.

How to Fix Null/Invalid IMEI on MediaTek Devices using Modem Meta (Maui Meta)How to Backup MediaTek Firmware using SP Flash Tool [2022]Remove FRP Lock on MediaTek using Scatter File and SP Flash ToolHow to Fix Invalid IMEI on any MediaTek via ADB Commands