The latter in turn allows you to flash a custom kernel, install Magisk Modules, try out Xposed Framework, or install Substratum Theme engine. To effectively carry out these tweaks, you need to either boot your device to Fastboot or Recovery mode. And this is where might be an issue or two for some users. We have seen many instances where an Android device gets stuck in Recovery Mode and gets the No Command message. In this tutorial, we will show you the reason for this issue and more importantly, how to fix it. So without further ado, let’s get on with the guide.

How to Permanently Install TWRP without TWRP ZIP File (only using TWRP.img file)How to Fix TWRP Error 7 (While Flashing Custom ROM via TWRP)How to Install OTA Updates in Rooted Android DevicePatch Stock Boot Image via Magisk and Flash it using Fastboot

METHOD 1:Fix Android Stuck in Recovery Mode: No Command via Hardware Keys

Well, sometimes, the issue might look scarier than is usually the predicament. And this might be the case this time around as well. While you might see the Android logo in its unusual dead state, but there’s nothing to worry about as such. The No Command Screen on your Android device is a mid-point between the Fastboot Mode and Stock Recovery. So all that you need to do is bypass this screen using a few hardware key combinations. Here’s how: That’s it. Your device will now boot to the OS and with this, you have successfully fixed the Android stuck in Recovery Mode: No Command screen issue.

METHOD 2: Fix Android Stuck in Recovery Mode: No Command by Flashing Stock Firmware

Prerequisites

First and foremost, install Android SDK Platform Tools on your PC. This will provide the necessary ADB and Fastboot binary files.Next up, download your device’s stock ROM/firmware. It is highly recommended that you download the same or the latest available build for your device. Installing an older build might cause a few issues in itself. As far as the download link goes, every OEM uploads them on their official site, usually under the Support section.

How to Fix FAILED (remote: unknown command) ErrorHow to Extract payload.bin and get the stock boot image fileFix: pip is not recognized as an internal or external commandDetailed Steps to Fix adb is not recognized Error

STEP 1: Boot to Recovery Mode from No Command Screen

As already mentioned in Method 1, here’s how to boot to the Recovery Mode from the No Command Screen:

Fix Mi Account Authorization | Unbrick Xiaomi | EDL ModeDisable DM-Verity or Android Verified Boot without TWRPHow to Update Magisk ZIP and Magisk Manager (without TWRP)Everything About Magisk- Manager, Modules, and More

STEP 2: Boot to Fastboot from Recovery Mode

It’s now time to boot your device to Fastboot Mode. For that, use the hardware key combinations to select the Reboot to Bootloader option. Then press the Power key to confirm your decision. Your device should now boot to the Fastboot/Bootloader Mode.

Do remember that the options might read out a little bit differently on various devices but should still be along similar lines.  Anyways, once booted to Fastboot, proceed with the below instruction to fix Android stuck in Recovery Mode: No Command screen.

STEP 3: Fix Recovery Mode: No Command via Fastboot

The third and final section requires you to flash the Fastboot ROM onto your device. Now there are three different approaches for the same. In the first method, you could use the flashing tool created by the OEM. As an example, Xiaomi comes with its Mi Flash Tool that allows you to directly flash Fastboot ROMs. In the next method, you could make use of the flash-all file that a lot of OEMs pack in with their firmware. All you have to do is place all these files inside the platform-tools folder, and then just launch that flash-all file (most of the time they are a batch file). Some OEMs are a little bit generous and provide a couple of additional flash files such as flash-all-except-data, etc.

However, if your device has just a single flash-all file, then the chances are it might also have the fastboot -w command. This command will end up wiping all the data from your device. So before executing this file, you could edit it via Notepad++ and remove that line of code from that file. Then save the file and launch it to the fix Android stuck in Recovery Mode: No Command screen issue. The third and final method involves flashing the ROM via Fastboot Commands. In that method, you would have to extract the contents of your Fastboot ROM inside the platform-tools folder and then launch the Command Prompt window inside that folder. After that, you would have to flash each file individually. Here are some fastboot commands that might help you out. Do keep in mind that you might need to modify them accordingly: REFER TO THIS GUIDE: How to Flash Stock Firmware via Fastboot Commands. Or you could also use the below Fastboot Commands: Once you have flashed the above commands, just execute the fastboot reboot command and your device will be back to normal. So with that, we conclude the guide on fix Android stuck in Recovery Mode: No Command screen. If you still have any queries, do let us know in the comments section below. fastboot flash radio .img fastboot flash update .zip fastboot flash pit diskmap.pit fastboot flash fwbl1 fwbl1.img fastboot flash ldfw_a ldfw.img fastboot flash ldfw_b ldfw.img fastboot flash keystorage_a keystorage.img fastboot flash keystorage_b keystorage.img fastboot flash bootloader_a bootloader.img fastboot flash bootloader_b bootloader.img fastboot flash modem_a modem.bin fastboot flash vbmeta_a vbmeta.img fastboot flash oem_a oem.img fastboot flash oem_b oem_other.img fastboot flash logo_a logo.bin fastboot flash dtbo_a dtbo.img fastboot flash boot_a boot.img fastboot flash system_a system.img_sparsechunk.0 fastboot flash system_a system.img_sparsechunk.1 fastboot flash system_a system.img_sparsechunk.2 fastboot flash system_a system.img_sparsechunk.3 fastboot flash system_a system.img_sparsechunk.4 fastboot flash system_a system.img_sparsechunk.5 fastboot flash system_a system.img_sparsechunk.6 fastboot flash system_a system.img_sparsechunk.7 fastboot flash system_a system.img_sparsechunk.8 fastboot flash system_a system.img_sparsechunk.9 fastboot flash system_a system.img_sparsechunk.10 fastboot flash system_b system_other.img_sparsechunk.0 fastboot flash system_b system_other.img_sparsechunk.1 fastboot flash system_b system_other.img_sparsechunk.2 fastboot flash vendor_a vendor.img fastboot erase userdata fastboot reboot bootloader

How to Fix FAILED (remote: unknown command) ErrorHow to Extract payload.bin and get the stock boot image fileFix: pip is not recognized as an internal or external commandFix Mi Account Authorization | Unbrick Xiaomi | EDL Mode

About Chief Editor

Fix Android stuck in Recovery Mode  No Command screen   DroidWin - 68Fix Android stuck in Recovery Mode  No Command screen   DroidWin - 47Fix Android stuck in Recovery Mode  No Command screen   DroidWin - 84Fix Android stuck in Recovery Mode  No Command screen   DroidWin - 52Fix Android stuck in Recovery Mode  No Command screen   DroidWin - 50